If you’ve ever tried to loosen a nut or bolt and it just wouldn’t budge, you know the frustration that comes with it. In some cases, the bolt may be so tight that you can’t get a wrench on it. Don’t give up yet, there are ways to loosen that stubborn bolt without risking damage to the surrounding area. In this article, we’ll show you four methods for loosening a stuck nut or bolt. We will also talk about how to avoid them. Read on to find out how!
1. Try using a penetrating oil like WD-40 to loosen the nut or bolt
If you’re having trouble getting a stuck nut or bolt to budge, try using a penetrating oil like WD-40. Just spray it onto the surface and let it sit for a few minutes to penetrate the metal and loosen the rust. Then, try again to unscrew the fastener. If it still won’t budge, you may need to resort to more forceful methods. Visit RIVERLAKE to learn more!
2. Apply heat to the area around the nut or bolt with a hair dryer or heat gun
If you’re having trouble getting a stuck nut or bolt to budge, try applying heat to the area around it with a hair dryer or heat gun. The extra warmth may help loosen the corrosion that’s binding the two pieces together. Just be careful not to overdo it. Too much heat can damage the surrounding materials.
3. Use a wrench to try and turn the nut or bolt in the opposite direction
If you’re having trouble loosening a stuck nut or bolt, you should use a wrench to turn the stuck nut or bolt in the opposite direction. This can sometimes loosen it enough to allow you to remove it by hand. If this doesn’t work, or if the nut or bolt is too tight to budge, you’ll need to resort to other methods.
4. If all else fails, use a hammer and chisel to break the nut or bolt loose
If all else fails, to loosen the stuck nut or bolt, use a hammer and chisel to break the nut or bolt loose. First, make sure that the chisel is smaller than the head of the nut or bolt. Second, place the chisel on the head of the nut or bolt at a 45 degree angle. Finally, strike the chisel with the hammer until the nut or bolt loosens.
Nuts and bolts that get stuck and how to avoid them
If you’ve ever had a nut or bolt that gets stuck, you know how frustrating it can be. Here are some tips on how to avoid this problem:
Use the right size wrench or socket. If the wrench is too small, it can slip and round off the corners of the nut or bolt. If it’s too big, it can damage the threads.
Use a lubricant on the threads. This will help to prevent them from binding.
Apply pressure evenly. Don’t force it by jamming the wrench in.
Use a cheater bar if you need more leverage. But be careful not to overdo it or you could break the wrench.
If all else fails, you can try heating the nut or bolt with a torch. This will sometimes break the bond and allow you to remove it. But be careful not to damage the surrounding area with the heat.
With these tips, you should be able to avoid getting your nuts and bolts stuck in the future.