No other material compares to the elegance and distinction that wooden furniture can provide to our home. Wood is one of the few materials that can impart a sense of warmth and naturalness to the areas in which it is used without introducing any artificial elements. It is also a remarkably durable material, with virtually no design going out of style while fashioned of wood. This does not happen with other materials, such as metals or compounds like methacrylate, as we know. In practically every home, wood is still the favored material. Patty Plus offers an upholstery cleaning service to homes, offices, and businesses in Surrey. If you are interested in an upholstery cleaning service in Surrey, they can provide you with the best quality service as per your requirement and budget. They have a huge team of cleaners, who are ready to provide you with the best cleaning service.

Today, we’d want to assist you in making your wooden furniture survive for many years. We’ll show you how to remove stains off its surface, particularly those caused by grease and oil. Let’s see how these last two need to be handled.


As previously said, wooden furniture requires specific care. We can be less careful with the other materials, but the wood requires attention to shine. It is, in certain ways, a substance that is extremely sensitive to its surroundings. After all, it is an alive being’s stuff. As a result, in the case of wood, prevention rather than cure is the most crucial factor. When it comes to cleaning, hardwood furniture, for example, requires more than a single pass.

Cleaning them merely with water is not recommended since the protective layer that the furniture has is removed. Mix four parts linseed oil with two parts turpentine gum in a container with very hot water to clean them (not every day, but occasionally). Our timber will be cleaned with turpentine and water. The oil will give it a lovely sheen. Instead of using cloths or feather dusters, use a dry microfiber cloth to clean wood. In the same way, we’ll clean and prepare the wood in the direction of the grain.

It’s important to remember that sunlight helps to whiten the wood. It’s crucial if we want a piece of furniture to keep its original color and beauty for a long period. Ideally, we should find out what kind of wood the furniture is made of. Cleaning walnuts using a cloth dampened with milk, for example, is good. In short, each wood is unique, and the small characteristics matter.


The first and most important prevention advice for treating hardwood furniture is to keep it dry. Any touch between the furniture and its surface and any sort of humidity must be avoided. This includes the things we’ll be supporting in them. As a result, we will make every effort to employ protectors to keep the surfaces from coming into direct touch with the wood. Even though the surface of a container containing a liquid is dry, we must remember this. Water can infiltrate and absorb the wood during the condensation phase, producing a mark.

If we want the wood to seem excellent, we should clean it every day or every two days at most. Dry cotton cloth will be used. There are cream and spray preparations available to improve their appearance.

Shoe polish oil comes in handy when we need to erase a stain caused by dampness. We will remove any excess once it has been applied to the surface and rub it in so that it blends in. Another alternative is to sand the surface gently and then apply mayonnaise.

We must remember that practically all stains are reversible while cleaning wood. For example, stains formed by “aggressive” beverages like tea or coffee can be removed. We’ll start by moisturizing the surface with something wet, then clean it. Alcohol-related stains are the same way.


Our hardwood furniture’s oil stains are a difficult foe to defeat. To begin, we must treat it with a suitable detergent. We’ll combine it with hot water and stir it thoroughly until foam forms. Always massage the surface in the direction of the wood grain with a moist cloth (being sure to remove any excess water). The area will next be rinsed with a clean cloth wet merely with water. To prevent water from infiltrating the surface, we must finish by thoroughly drying it.

Another option is to use a blow dryer to apply heat. This will get the oil up to temperature, making it easier to remove after it has returned to its liquid state. Then we’ll try to infuse it with joyful oil using absorbent paper. Finally, we’ll go over the surface with a piece of cotton. Hydrogen peroxide must be used to wet this piece of cotton. We’ll probably have to repeat the process a few times more, but this time we’ll make sure to allow enough time for it to dry. Otherwise, we’ll add moisture and use a moisture stain instead of an oil stain.


Grease stains are more common on wood that has not been protected. The tragedy is served if the furniture in issue is regularly utilized to dine. To begin, we must ensure that the tabletop is protected with a tablecloth. There’s nothing to be concerned about if it’s too late. Grease stains can be removed as well.

Water and ammonia will be the liquids in this situation. Gloves should always be used for work in this scenario and anywhere else. We’ll use a cloth to apply a little ammonia to the surface. We’ll avoid applying them in excess, just like the rest of the items, to avoid absorption. We’ll rub the surface in the grain’s direction. If the problem persists, we can add a little ash to the water. We’ll combine that with some lighter fuel. It’s available from tobacconists and bazaars. We’ll use a cloth to carefully apply the mixture, avoiding any surplus. It is critical to never apply the mixture directly to the surface. Then, as always, we’ll dry it and polish it with a product designed for the type of wood we’re working with.

Related Articles

Leave a Reply

Back to top button